120 VAC Powered Enclosures

The Altelix NP141105VA1C is ideal for protecting equipment from harsh environments and tampering. This enclosure features two 3 inch air vents. Rain shields help prevent rain water from entering the enclosure. This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. A ground lug is provided on the side of the enclosure.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3 & 3RX

The Altelix NP141105VFA1C-DIN is ideal for protecting DIN rail mounted equipment from harsh environments and tampering. Included with this enclosure are (2) 9" long 20 gauge steel 35mm top hat DIN rails. They easily attached to the 2.0mm thick aluminum equipment mounting plate included with the enclosure. Hardware for mounting the DIN rails and equipment mounting plate is included. It features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C).

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Cooling Fan
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Heating & Cooling Fan
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF141206VFA1-DF features: a programmable digital temperature controller, two 4" vents and a cooling fan. Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. This enclosure provides two pre-wired 120VAC power outlets and a terminal strip, for easy wiring by a qualified installer. The fan is wired internally, leaving all power outlets available for installed equipment.

• Wall Mount
• NEMA Type 3R & 3RX
• Power Cord Not Included
• Includes Programmable Digital Temperature Controller

The Altelix NF141206VFA1C-DF is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Featuring: an aluminum mounting plate, a programmable digital temperature controller, two pre-wired 120VAC power outlets, two 4" vents and a cooling fan. Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all of the power outlets available for installed equipment.

• Wall Mount
• NEMA Type 3R & 3RX
• Power Cord Included
• Includes Programmable Digital Temperature Controller

The Altelix NF141206HA1-DH is ideal for cold environments. Featuring: a 200W heating system, a programmable digital temperature controller, and two pre-wired 120VAC power outlets. A terminal strip provides easy wiring by a qualified installer.

• Wall Mount
• NEMA Type 4 & 4X
• Power Cord Not Included
• Includes Programmable Digital Temperature Controller

The Altelix NF141206HA1C-DH is a heated NEMA rated enclosure ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Featuring: aluminum mounting plate, two pre-wired 120VAC powered outlets, 200W heating system, and a programmable digital temperature controller.

• Wall Mount
• NEMA Type 4 & 4X
• Power Cord Included
• Includes Programmable Digital Temperature Controller

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• 120 VAC Outlets
• UL94-5V Flame Rating