Bridge U-Handles

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 179 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 179 mm
• Finish: Black

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 7.05" mm
• Finish: Black
• Thread: 5/16 x 18

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 179 mm
• Finish: Black
• Thread: M8

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 235 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 235 mm
• Finish: Black

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 86 mm
• Finish: Black
• Thread: M6

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 117 mm
• Finish: Black
• Thread: M8

The J.W.Winco series MFE has good ergonomic features. The MFE series is the economical version of the MF series. Maximum heat resistance is 150 °F.

• Counterbored Mounting Holes
• Hole Distance: 93.5 mm
• Finish: Black Matte

The J.W.Winco series MFE has good ergonomic features. The MFE series is the economical version of the MF series. Maximum heat resistance is 150 °F.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Black Matte

The J.W.Winco series MFE has good ergonomic features. The MFE series is the economical version of the MF series. Maximum heat resistance is 150 °F.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Black Matte

The J.W.Winco series MFE has good ergonomic features. The MFE series is the economical version of the MF series. Maximum heat resistance is 150 °F.

• Counterbored Mounting Holes
• Hole Distance: 132 mm
• Finish: Black Matte