The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
Enclosure vents allow passive air to be drawn into an enclosure through a lower vent and out through a higher vent. This helps cools small devices, equalizes pressure, and prevents condensation.
List View
The Saginaw SCE-BVKD is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the bottom of an enclosure as a drain and vent.
The Saginaw SCE-BVK is designed for indoor or outdoor applications to handle the large negative pressure differential caused in a tightly sealed enclosure in extreme weather conditions or wash down applications that draw water into the enclosure. Adding a breather vent will equalize this pressure differential. Installed on the side of your enclosure as a breather or installed on the bottom as a drain and vent.
The Bud Industries IPV-1115 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 60mm x 60mm fan (not included).
The Bud Industries IPV-1116 is designed to equalize internal and external temperature and pressure, and to prevent internal condensation. Designed to accept a 80mm x 80mm fan (not included).
The Stego 28402.0-01 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28401.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28401.0-02 is designed to provide a protected enclosure environment for valuable and crucial components with an IP66 rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 08400.9-01 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.
The Hammond SDA412 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.
The Stego 28406.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Stego 28405.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.
The Integra FS-KIT-2 is designed to provide enclosures with sufficient air circulation, equalize internal/external pressures and prevent both condensation and moisture.