Electrical Enclosures

The Hammond Manufacturing 1481WDH1418 is an extra deep HMI Cover Kit designed to provide protection and easy access to components and equipment installed inside an enclosure.

• UV Resistant Window
• Mild Steel
• Hinged Clear Cover with Metal Snap Latches
• RAL 7035 Gray
• NEMA 4, 12

The Hammond Manufacturing 1481SSDH1418 is an extra deep HMI Cover Kit designed to provide protection and easy access to components and equipment installed inside an enclosure.

• 316 SS
• Hinged Solid Cover with Metal Snap Latches
• 316 Stainless Steel
• NEMA 4, 4X, 12

The Hammond Manufacturing 1481WSSDH1418 is an extra deep HMI Cover Kit designed to provide protection and easy access to components and equipment installed inside an enclosure.

• UV Resistant Window
• 316 SS
• Hinged Clear Cover with Metal Snap Latches
• 316 Stainless Steel
• NEMA 4, 4X, 12

The Hammond Manufacturing ECP12168 is designed to enclose electronic controls, instruments and components in indoor environments where dirt, dust, oil and water may be present.

• Hinged (Single Door)
• Wall
• RAL 7040 Gray
• NEMA Type 12 and 13

The Saginaw SCE-12C16ELJ is designed to house electrical and electronic controls, instruments, and components. Provides protection from dust, dirt, oil and water. Consolets can be mounted on either of two sides to give a control surface inclined at 30�or 60� degrees. Can be mounted on desks, machines, or pedestals.

• Hinged (Single Door)
• Other
• ANSI 61- Gray
• NEMA Type 3R, 4, 12 and 13

The Hammond Manufacturing 1488HJ9 is designed for use as electric, hydraulic or pneumatic control and instrument enclosures.

• Hinged (Single Door)
• Base
• ANSI 61 Gray
• NEMA Type 12 and 13

The Saginaw SCE-12C20ELJ is designed to house electrical and electronic controls, instruments, and components. Provides protection from dust, dirt, oil and water. Consolets can be mounted on either of two sides to give a control surface inclined at 30�or 60� degrees. Can be mounted on desks, machines, or pedestals.

• Hinged (Single Door)
• Other
• ANSI 61- Gray
• NEMA Type 3R, 4, 12 and 13

The Hammond Manufacturing 1488HL9 is designed for use as electric, hydraulic or pneumatic control and instrument enclosures.

• Hinged (Single Door)
• Base
• ANSI 61 Gray
• NEMA Type 12 and 13

The Saginaw Control & Engineering SCE-12EL2406SSLP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Opaque/Solid
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-12EL2406SS6LP is designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond Manufacturing 1418A6 is designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 12 and 13