Electrical Enclosures

The Hammond Manufacturing EJ14126S16 is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 3R, 4, 4X, 12, and 13

The Saginaw Control & Engineering SCE-1412CHNFSS6 is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures.

• Hinged (Single Door)
• Flange
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1412ELJSS6 is designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions.

• Hinged (Single Door)
• Wall
• Brushed
• NEMA Type 3R, 4, 4X, 12 and 13

The Hammond Manufacturing 1414N4ALM6 is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Lift-Off
• Feet
• Natural
• NEMA Type 4, 4X, 12 and 13

The Hammond Manufacturing EJ14126AL is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Flange
• Natural
• NEMA Type 3R, 4, 4X, 12 and 13

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Cooling Fan
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Cooling Fan
• 120 VAC Outlets
• Pre-Wired Power Cord
• UL94-5V Flame Rating

The Altelix NF series are ideal for protecting equipment from harsh envoirnments and tampering. Constructed from molded fiberglass reinforced polyester (FRP), these rugged enclosures can be used to protect a wider range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Fiberglass Material
• Built-In Heating & Cooling Fan
• 120 VAC Outlets
• UL94-5V Flame Rating

The Altelix NF141206VFA1-DF features: a programmable digital temperature controller, two 4" vents and a cooling fan. Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. This enclosure provides two pre-wired 120VAC power outlets and a terminal strip, for easy wiring by a qualified installer. The fan is wired internally, leaving all power outlets available for installed equipment.

• Wall Mount
• NEMA Type 3R & 3RX
• Power Cord Not Included
• Includes Programmable Digital Temperature Controller

The Altelix NF141206VFA1C-DF is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Featuring: an aluminum mounting plate, a programmable digital temperature controller, two pre-wired 120VAC power outlets, two 4" vents and a cooling fan. Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all of the power outlets available for installed equipment.

• Wall Mount
• NEMA Type 3R & 3RX
• Power Cord Included
• Includes Programmable Digital Temperature Controller