Electrical Enclosures

The Bud Industries NBB-15243 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries PTQ-11057 is designed for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X and 6

The Bud Industries PTH-22446-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22446 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Fibox UL PC 2819 18 T is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 6, 6P and 12

The Fibox UL PC 2819 18 T-2FSH is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Hinged (Single Door)
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 6, 6P and 12

The Fibox UL PC 2819 18 G is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 6, 6P and 12

The Fibox UL PC 2819 18 G-2FSH is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Hinged (Single Door)
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 6, 6P and 12

The Hammond Manufacturing PJ1086TW is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Feet
• Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10085CHQRFG is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1008FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1008FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13