Enclosure Accessories

Integra DIN18 is a set of 35mm slotted DIN rail, pre-cut to a length of 16.5" and includes mounting screws. The pre-cut size is designed to mount within all 18" wide Integra polycarbonate enclosures.

• Dims: 16.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN16-GEN is a set of 35mm slotted DIN rail, pre-cut to a length of 16.88" and includes mounting screws. The pre-cut size is designed to mount within all 16" wide Integra polycarbonate enclosures.

• Dims: 16.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN24 is a set of 35mm slotted DIN rail, pre-cut to a length of 23.63" and includes mounting screws. The pre-cut size is designed to mount within all 24" wide Integra polycarbonate enclosures.

• Dims: 23.63 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN4-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 3.82" and includes mounting screws. The pre-cut size is designed to mount within all 4" wide Integra polycarbonate enclosures.

• Dims: 3.82 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.5" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.5 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN5-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 5" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN6 is a set of 35mm slotted DIN rail, pre-cut to a length of 4.88" and includes mounting screws. The pre-cut size is designed to mount within all 6" wide Integra polycarbonate enclosures.

• Dims: 4.88 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8 is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN8-IMP is a set of 35mm slotted DIN rail, pre-cut to a length of 6.75" and includes mounting screws. The pre-cut size is designed to mount within all 8" wide Integra polycarbonate enclosures.

• Dims: 6.75 x 1.39 x 0.28" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

Integra DIN10 is a set of 35mm slotted DIN rail, pre-cut to a length of 8.75" and includes mounting screws. The pre-cut size is designed to mount within all 10" wide Integra polycarbonate enclosures.

• Dims: 35mm x 7mm x 8.75" long
• Slotted top hat DIN rail design
• Steel Design
• Sold as set of two

The Hammond Manufacturing 1418WFHP panel rails provides Hammond 72x24" enclosures with 19 or 24" rack mounting capability.

• 35U
• 10 Gauge Steel, Powder Coated White
• Drilled and tapped 10-32 to EIA spacing of 0.5" - 0.63" - 0.63" - 0.5".

The Allied Moulded AMHS400 is designed to seal unused holes in your enclosures such as push­button, conduit and knock­out holes while maintaining applicable NEMA/UL/CSA enclosure ratings.

• Hole Dia. Range: 4.500-4.750"
• Trade Size: 4.641
• RAL 7035 Light Gray Polycarbonate