Enclosure Filter Fans

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The Filter Fan Plus draws the heated air from the enclosure to the outside. Cooler outside air enters the enclosure via the intake filter.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Direction of air flow can be switched
• Intake and exhaust hoods prevent direct infiltration
• Self-adhesive seal
• Air channeling allows for quiet operation

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Intake and exhaust hoods prevent direct infiltration
• High air volume
• Time-saving installation
• UV resistant plastic

The Pfannenberg PTF 60700 series reach a particularly high airflow while at the same time providing an IP 54, Type 12 system of protection. Our Top Mount Filterfans guarantee an optimum passage of air and even temperature distribution (natural air convection is supported).

• Airflow rate up to 324 CFM
• System of protection IP 54, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Light gray

The Pfannenberg PTF 60700 series reach a particularly high airflow while at the same time providing an IP 54, Type 12 system of protection. Our Top Mount Filterfans guarantee an optimum passage of air and even temperature distribution (natural air convection is supported).

• Airflow rate up to 324 CFM
• System of protection IP 54, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Light gray

The Pfannenberg PF 65000 SL series offer all the original PF Filterfans 4.0 features with a smaller fan. The fluted filter mat's folded structure provides an unrivalled airflow guaranteeing Type 12 protection, while also extending the filters lifetime 300% longer than conventional filter media.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Black

The Pfannenberg PF 65000 SL series offer all the original PF Filterfans 4.0 features with a smaller fan. The fluted filter mat's folded structure provides an unrivalled airflow guaranteeing Type 12 protection, while also extending the filters lifetime 300% longer than conventional filter media.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Light gray

The Hammond PF SL GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PF SL GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted light gray

The Pfannenberg PF 65000 SL series offer all the original PF Filterfans 4.0 features with a smaller fan. The fluted filter mat's folded structure provides an unrivalled airflow guaranteeing Type 12 protection, while also extending the filters lifetime 300% longer than conventional filter media.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Black