Fiberglass Wall Mount Enclosures

The Bud Industries PTH-22446 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Hammond Manufacturing PJ1086TW is designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

• Hinged (Single Door)
• Feet
• Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10085CHQRFG is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1008FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1008FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10086FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10086FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries PTH-22422-C assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Bud Industries PTH-22422 assures strong protection by virtue of its polycarbonate plastic reinforced with 10% glass fibers. The design offers dual configuration for the location of the hinge: on the long side or on the short side.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 1, 2, 4, 4X, and 6

The Allied Moulded AM1206 is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Lift-Off
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 6P, 12 and 13

The Allied Moulded AM1206H is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13

The Allied Moulded AM1206L is designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, chemical plants, and many other applications.

• Hinged (Single Door)
• Feet
• RAL 7035 - Gray
• NEMA Type 4, 4X, 12 and 13