The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 6 to 12 mm
• Rating: IP68
• Color: Gray
• Standards: UL, RoHS

The Hammond 1427NCG series liquid-tight cable glands are used to seal cable entries, keep contaminants from entering enclosures, provide strain relief and thus reduce stress on components and termination points inside enclosures.

• Single Unit
• Clamping Range: 22 to 32 mm
• Rating: IP68
• Color: Black
• Standards: UL, RoHS

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 38 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 4.92 x 4.92"
• Painted light gray

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 17 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 3.62 x 3.62"
• Painted black

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 94 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 8.78 x 8.78"
• Painted light gray

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 169 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 8.78 x 8.78"
• Painted light gray

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 297 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 462 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 560 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PF SL GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 325 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PF SL GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 427 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted black

The Hammond PTF GEN4 series enclosure filter fans are made of strong thermoplastic material, heat resistant, UL 94 VO approved and use a patented “Click & Fit” design which provides a hardware free installation.

• Airflow rate up to 356 CFM
• System of protection IP 55, NEMA Type 12
• Cut-out dimensions: 11.46 x 11.46"
• Painted light gray