Indexing Plungers

The J.W.Winco series GN612 are best utilized when the pin needs to be retracted. A groove exists so the plunger can be held in both positions. The new grooved lever arm provides the user with a better grip when operating the mechanism. In addition, the snap-on plastic ribbed sleeve offers a more aesthetically pleasing and comfortable finger grip.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN612 are best utilized when the pin needs to be retracted. A groove exists so the plunger can be held in both positions. The new grooved lever arm provides the user with a better grip when operating the mechanism. In addition, the snap-on plastic ribbed sleeve offers a more aesthetically pleasing and comfortable finger grip.

• Steel Plunger Pin
• Lock-Out
• Thread: M20

The J.W.Winco series GN612 are best utilized when the pin needs to be retracted. A groove exists so the plunger can be held in both positions. The new grooved lever arm provides the user with a better grip when operating the mechanism. In addition, the snap-on plastic ribbed sleeve offers a more aesthetically pleasing and comfortable finger grip.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN817.3 have been developed to enable precise locating when guide bushings are used. A plain guide bushing is used whereby the dimension of the plunger determines the length of the bushing. Both components are hardened and ground. The bushing length influences the accuracy of the positioning. The version with rest position is used in such applications where the plunger must not protrude continually. In that case, the knob is retracted and then turned by 90°. A notch prevents the plunger from turning by error or vibration.

• Steel Plunger Pin