Indexing Plungers

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M12

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M12

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: 5/8 x 11

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Thread: 5/8 x 11

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M16

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M16

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series HRSP are intended for use in applications requiring a part to be located or indexed into a particular position and does not require the pin to remain retracted for long periods of time.

• Steel Plunger Pin
• Thread: 3/8 x 16

The J.W.Winco series HRSP are intended for use in applications requiring a part to be located or indexed into a particular position and does not require the pin to remain retracted for long periods of time.

• Steel Plunger Pin
• Thread: 3/8 x 16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: 5/8 x 11