Accessories

Adjustable Mounting Bracket for Raytek CI, CM Infrared Sensors

Adjustable Mounting Bracket for Raytek MI3 Infrared Sensors

The Raytek XXXMIACCJ is a air cooling system for the MI3 series sensor and allows the unit to operate at temperatures up to 392 F (200 C). The air?cooling system comes with a 0.8m insulated hose and T?adapter which allows for a air?cooling hose to be installed without interrupting the connections to the box.

The Raytek XXXMIACCJ1 is a air cooling system for the MI3 series sensor and allows the unit to operate at temperatures up to 392 F (200 C). The air?cooling system comes with a 2.8m insulated hose and T?adapter which allows for a air?cooling hose to be installed without interrupting the connections to the box.

The Raytek XXXTXXACAP is an Air Purge Collar for Gp Sensors.

The stainless steel air purge collar is used to keep dust, moisture, airborne particles, and vapors away from the lens. It can be mounted before or after the bracket. A 4mm (.16 in) outside diameter plastic tubing is recommended to connect the fitting. The pressure of air should be between 0.6 and 1 bar (8.7 to 15 PSI). Clean, oil free air is recommended.

The air purge collar is used to keep dust, moisture, airborne particles, and vapors away from the lens. It can be mounted before or after the bracket. A 4mm (.16 in) outside diameter plastic tubing is recommended to connect the fitting. The pressure of air should be between 0.6 and 1 bar (8.7 to 15 PSI). Clean, oil free air is recommended. (Metric Thread)

The aluminum air purge collar is used to keep dust, moisture, airborne particles, and vapors away from the lens. It can be mounted before or after the bracket. A 4mm (.16 in) outside diameter plastic tubing is recommended to connect the fitting. The pressure of air should be between 0.6 and 1 bar (8.7 to 15 PSI). Clean, oil free air is recommended.

The stainless steel air purge collar is used to keep dust, moisture, airborne particles, and vapors away from the lens. It can be mounted before or after the bracket. A 4mm (.16 in) outside diameter plastic tubing is recommended to connect the fitting. The pressure of air should be between 0.6 and 1 bar (8.7 to 15 PSI). Clean, oil free air is recommended.

The air purge collar is used to keep dust, moisture, airborne particles, and vapors away from the lens. It can be mounted before or after the bracket. A 4mm (.16 in) outside diameter plastic tubing is recommended to connect the fitting. The pressure of air should be between 0.6 and 1 bar (8.7 to 15 PSI). Clean, oil free air is recommended. (Metric Thread)

Raytek air purge jacket is used to keep dust, moisture, airborne particles,and vapors away from the sensing head.

• Withstands ambient temperatures up to 180?C (356?F)
• Limited use for cooling purposes
• ecommended air flow rate is 30 to 60 l / min (0.5 to 1 cfm). (max. pressure is 5 bar)

Air/Water Cooled Housing (for units with high temperature cable)