The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: 1/2 x 13

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: 1/2 x 13

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M10

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: M12

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M12

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: M16

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M16

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: M20

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: 5/8 x 11

The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Thread: 5/8 x 11