The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M8

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M8

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M8

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M8

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822.1 are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10