The J.W.Winco series EN630 design of ledge handles matches the product family of the Ergostyle. A typical application for ledge handles is on double swing doors on machine shrouds or fixtures. The ledge handles are protection for the operator’s fingers. At the same time they shroud the two fixing screws of the ledge handle.

• Counterbored Through Holes
• Hole Distance: 93.5 mm
• Finish: Black

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 3.39" mm
• Finish: Black
• Thread: 1/4 x 20

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 4.61" mm
• Finish: Black
• Thread: 5/16 x 18

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 5.20" mm
• Finish: Black
• Thread: 5/16 x 18

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 5.91" mm
• Finish: Black
• Thread: 5/16 x 18

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 7.05" mm
• Finish: Black
• Thread: 5/16 x 18

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 86 mm
• Finish: Black
• Thread: M6

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 86 mm
• Finish: Black
• Thread: M6

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 117 mm
• Finish: Black
• Thread: M6

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 117 mm
• Finish: Black
• Thread: M8

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 117 mm
• Finish: Black
• Thread: M8

The J.W.Winco series EN725 is an original design technopolymer plastic cabinet "U" Handle. High impact strength. Resistant to solvents, oils, grease and other chemical agents. Technopolymer (Polypropylene PP) shock resistant, temperature resistant up to 212 °F.

• Tapped Inserts
• Hole Distance: 132 mm
• Finish: Black
• Thread: M8