The J.W.Winco series GN426.1 are produced from profiled aluminium extrusions.

• Tapped Holes
• Hole Distance: 500 mm
• Finish: Black Powder Coated
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 300 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 300 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 400 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 400 mm
• Finish: Shot-Blasted
• Thread: M10

The J.W.Winco series GN426 are made from a bent aluminum profile and have excellent stability and ergonomic design.

• Tapped Holes
• Hole Distance: 200 mm
• Finish: Black Textured
• Thread: M8

The J.W.Winco series GN426 are made from a bent aluminum profile and have excellent stability and ergonomic design.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Black Textured
• Thread: M8

The J.W.Winco series GN426 are made from a bent aluminum profile and have excellent stability and ergonomic design.

• Tapped Holes
• Hole Distance: 300 mm
• Finish: Black Textured
• Thread: M8

The J.W.Winco series GN426 are made from a bent aluminum profile and have excellent stability and ergonomic design.

• Tapped Holes
• Hole Distance: 350 mm
• Finish: Black Textured
• Thread: M8

The J.W.Winco series GN426 are made from a bent aluminum profile and have excellent stability and ergonomic design.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Black Textured
• Thread: M10