Machine Components

The J.W.Winco series GN617 are standard units for a wide range of indexing mechanisms. Type G or GK with threaded plunger end are for applications where a special knob to customer's request or own design is required, or for such cases where the spindle is linked directly to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series HRSS are intended for use in certain corrosion free environments where an application requiring a part to be located or indexed into a particular position is needed and where the pin is not required to remain retracted for long periods of time.

• Stainless Steel Plunger Pin
• Thread: 3/8 x 16

The J.W.Winco series HRSS are intended for use in certain corrosion free environments where an application requiring a part to be located or indexed into a particular position is needed and where the pin is not required to remain retracted for long periods of time.

• Stainless Steel Plunger Pin
• Thread: 3/8 x 16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Thread: M8

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M8

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Thread: M8

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M8

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Thread: M8

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Thread: M10