Polycarbonate Enclosures

The Altelix NP141105G is ideal for protecting equipment from harsh enviornments and tampering. It is molded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. This rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Hinged (Single Door)
• Wall Mount
• Color: RAL6001 - Green
• NEMA Type 3 & 3X

The Altelix NP141105P is ideal for protecting equipment from harsh enviornments and tampering. It is molded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. This rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3 & 3X

The Altelix NP141105R is ideal for protecting equipment from harsh enviornments and tampering. It is molded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. This rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Hinged (Single Door)
• Wall Mount
• Color: RAL3000 - Red
• NEMA Type 3 & 3X

The Altelix NP141105Y is ideal for protecting equipment from harsh enviornments and tampering. It is molded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. This rugged enclosures can be used to protect a wide range of equipment, from wireless and wired networking devices, security equipment and building automation equipment.

• Hinged (Single Door)
• Wall Mount
• Color: RAL1023 - Yellow
• NEMA Type 3 & 3X

The Altelix NP141105V-PKIT02 includes a heavy duty steel pole mount bracket and two stainless steel bands. It features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for a padlock. Knock-out holes are provided on the top and bottom.

• Hinged (Single Door)
• Pole Mount
• Color: Gray
• NEMA Type 3 & 3X

The Altelix NP141105VFD1 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F and turns off when it drops to 79°F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VFD2 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F and turns off when it drops to 79°F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VFD4 is ideal for protecting equipment from harsh environments and tampering. This enclosure features a terminal strip and ground lug for simplified wiring on-site. The pre-installed PG16 cable gland is designed for use with a much wider range cable types and will seal against cable much thinner then a typical PG16 cable gland. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F and turns off when it drops to 79°F.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105V features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Altelix NP141105VP features two 3 inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. Moulded out of UV resistant PC+ABS, a high thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. 2mm thick aluminum mounting plate included.

• Hinged (Single Door)
• Wall Mount
• Color: Gray
• NEMA Type 3R & 3RX

The Bud Industries NBB-10265 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13

The Bud Industries NBB-10245 is a wall mounting enclosure that's lightweight, non-conductive, impact resistant, and has good corrosion resistance.

• Hinged (Single Door)
• Wall
• ANSI 65 Gray
• NEMA Type 4, 4X, 12 and 13