Pull Handles

The J.W.Winco series GN481 tubes extrusion for edge handles is formed so that the two countersunk self tapping screws with Torx cut their own counter thread in the extrusion to hold the end caps in position.

• End Caps
• Hole Distance: 300 mm
• Finish: Black Powder Coat

The J.W.Winco series GN481 tubes extrusion for edge handles is formed so that the two countersunk self tapping screws with Torx cut their own counter thread in the extrusion to hold the end caps in position.

• End Caps
• Hole Distance: 400 mm
• Finish: Black Powder Coat

The J.W.Winco series GN481 tubes extrusion for edge handles is formed so that the two countersunk self tapping screws with Torx cut their own counter thread in the extrusion to hold the end caps in position.

• End Caps
• Hole Distance: 500 mm
• Finish: Black Powder Coat

The J.W.Winco series GN481 tubes extrusion for edge handles is formed so that the two countersunk self tapping screws with Torx cut their own counter thread in the extrusion to hold the end caps in position.

• End Caps
• Hole Distance: 100 mm
• Finish: Black Powder Coat

The J.W.Winco series GN481 tubes extrusion for edge handles is formed so that the two countersunk self tapping screws with Torx cut their own counter thread in the extrusion to hold the end caps in position.

• End Caps
• Hole Distance: 200 mm
• Finish: Black Powder Coat

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Anodized

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Black

The J.W.Winco series GN430 are suitable for use as drawer handles. The screw channel for screw size M6 (extruded aluminum) allows an optimal number of mounting screws in any position within the dimensions l2. A minimum screw-in depth of 10 mm must be maintained. Heat resistance of end caps 195° F.

• No Holes
• Finish: Anodized