Pull Handles

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Orange

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Black

The J.W.Winco series EN628 are an original design technopolymer plastic Ergostyle bridge handles. The slight bending of the handle creates an elegant design, improves the grip and distributes the force on the fingers of the hand during use. Resistant to solvents, oils, grease and other chemical agents.

• Counterbored Mounting Holes
• Hole Distance: 94 mm
• Finish: Black

The J.W.Winco series EN628 are an original design technopolymer plastic Ergostyle bridge handles. The slight bending of the handle creates an elegant design, improves the grip and distributes the force on the fingers of the hand during use. Resistant to solvents, oils, grease and other chemical agents.

• Tapped Inserts
• Hole Distance: 94 mm
• Finish: Black
• Thread: M6

The J.W.Winco series EN628 are an original design technopolymer plastic Ergostyle bridge handles. The slight bending of the handle creates an elegant design, improves the grip and distributes the force on the fingers of the hand during use. Resistant to solvents, oils, grease and other chemical agents.

• Tapped Inserts
• Hole Distance: 3.70" mm
• Finish: Black
• Thread: 1/4 x 20

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Orange

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Black

The J.W.Winco series EN528 are fitted to the drawers from the outside using cap screws. Cabinet "U" handles type ESD are made out of a conductive plastic material which prevents an electrostactical loading. The imprint "ESD" on the surface of the handle defines the special antistatical properties according to IEC 61340-5-1.

• Counterbored Mounting Holes
• Hole Distance: 117 mm
• Finish: Black