Pull Handles

The J.W.Winco series GN425.3 have no thread and are designed for applications that require the handle to be welded or for applications that require special threads, holes, etc. for mounting.

• No Holes
• Hole Distance: 200 mm
• Finish: Shot-Blasted

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 200 mm
• Finish: Shot-Blasted
• Thread: M5

The J.W.Winco series GN429 are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning. Features a Stainless steel handle, European Standard (AISI 316 L). Sealing ring made of hydrogenated acrylonitrile butadiene rubber (H-NBR) blue, temperature resistant -77° F to + 302 °F, Hardness 85±5 Shore A, FDA compliant.

• Tapped Holes
• Hole Distance: 200 mm
• Finish: Matte
• Thread: M6

The J.W.Winco series GN429 are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning. Features a Stainless steel handle, European Standard (AISI 316 L). Sealing ring made of hydrogenated acrylonitrile butadiene rubber (H-NBR) blue, temperature resistant -77° F to + 302 °F, Hardness 85±5 Shore A, FDA compliant.

• Tapped Holes
• Hole Distance: 200 mm
• Finish: Polished
• Thread: M6

The J.W.Winco series GN565.5 is a stainless steel handle often used in the food industry or other such applications where a non-corrosive material is necessary. The shape of this sturdy handle has good ergonomic features. Type A "U" Handles are made from profile extrusions.

• Tapped Holes
• Hole Distance: 200 mm
• Finish: Shot-Blasted
• Thread: M6

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 8.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 8.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 9.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 9.00" mm
• Finish: Shot-Blasted
• Thread: 10 x 32

The J.W.Winco series GN427.5 are produced from profiled extrusions.

• Tapped Holes
• Hole Distance: 235 mm
• Finish: Shot-Blasted

The J.W.Winco series GN425 are supplied with two stainless steel location disks, which guarantee a perfect location even with large holes in the cabinet. The disks are loosely enclosed.

• Tapped Holes
• Hole Distance: 235 mm
• Finish: Shot-Blasted
• Thread: M5

The J.W.Winco series GN426.5 can be mounted from the back (Type A) or from the operator's side (Type B). In the latter case, the stud is first screwed in from the machine side and then the handle is pushed on and secured with the grub screw. The mounting studs allow the handles to be assembled back to back, to produce a double handle.

• Tapped Holes
• Hole Distance: 250 mm
• Finish: Shot-Blasted
• Thread: M10