Pull Knob Indexing Plungers

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M10

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10