Pull Knob Indexing Plungers

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M20

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Thread: M20

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M20

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M10

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M12

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M16

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Stainless Steel Plunger Pin
• Lock-Out
• Stainless Steel Lock Nut
• Thread: M16