Pull Knob Indexing Plungers

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M8

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M8

The J.W.Winco series GN 612 are best utilized in applications where the pin may need to be retracted periodically. By rotating the lever arm 180 degrees, the plunger pin is withdrawn. The notch allows for safe positioning while the plunger pin is held in the retracted position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M10

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608 is used in applications which require surface mounting.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN817.3 have been developed to enable precise locating when guide bushings are used. A plain guide bushing is used whereby the dimension of the plunger determines the length of the bushing. Both components are hardened and ground. The bushing length influences the accuracy of the positioning. The version with rest position is used in such applications where the plunger must not protrude continually. In that case, the knob is retracted and then turned by 90°. A notch prevents the plunger from turning by error or vibration.

• Steel Plunger Pin