Pull Knob Indexing Plungers

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: 5/8 x 11

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: 5/8 x 11

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: 5/8 x 11

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN817 are used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Type G/GK with threaded spindle is for applications where a specific knob or special receptacle is required for operation.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Thread: 5/8 x 11

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: 5/8 x 11

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Thread: M20

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: M20

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Thread: 5/16 x 18

The J.W.Winco series GN817.2 feature an extended knob. Type with rest position is used in applications where the plunger must not protrude continually. In that case, the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

• Steel Plunger Pin
• Steel Lock Nut
• Thread: 5/16 x 18