The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
List View
The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.
The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.
The J.W.Winco series GN817.3 have been developed to enable precise locating when guide bushings are used. A plain guide bushing is used whereby the dimension of the plunger determines the length of the bushing. Both components are hardened and ground. The bushing length influences the accuracy of the positioning. The version with rest position is used in such applications where the plunger must not protrude continually. In that case, the knob is retracted and then turned by 90°. A notch prevents the plunger from turning by error or vibration.
The J.W.Winco series GN617.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.