888-886-8185
8am-5pm PST
Raytek RAYCI3AW Infrared Sensor with Coolable Housing

The Raytek CI non-contact infrared temperature sensor is low-cost and easy to install for industrial manufacturing processes and OEM applications. They are designed to measure accurately and repeatably the amount of heat energy emitted from an object and to convert that energy into a measurable electrical signal.

  • Pre-installed Water cooled jacket with built-in air purging
  • 1m (3.3') Teflon cable, withstands up to max 500 F (260 C)
  • Optics (D:S): 4:1
  • Response Time: 350 ms
  • Outputs: Linear 10 mV/C, scaled 0-5 V
Price: $361.08
Retail: $408.00
    Part# RAYCI3AW
    OutputLinear 10 mV/C, scaled 0-5 V
    Temperature Range32 to 662 F
    Optics (D:S)4:1
    AccuracyLarger of +/- 2% or +/- 6 F (+/- 3 C) at 32 to 240 F (0 to 115 C), larger of +/- 5% or +/- 10 F (+/- 6 C) at 241 to 440 F (116 to 225 C), +/- 5% at 441 to 662 F (226 to 350 C)
    Repeatability+/- 1% of measured value or +/- 2 F (1 C), whichever is greater
    Temperature Resolution< 1 F (0.5 C)
    Response Time350 ms
    Emissivity0.95
    Spectral Response7-18 ?m
    Cable1m (3.3') Teflon cable, withstands up to max 500 F (260 C)
    Output Impedance50 Ohms
    Load Impedance (Minimum)50,000 Ohms
    Power Requirement12-24 VDC (? 2.5% ripple) @ 20mA
    HousingNEMA 4 (IP65) rated stainless-steel head with Pre-installed Water cooled jacket with built-in air purging
    Operational Ambient Temperature0ºC to 260°C (32ºF to 500°F)
    Storage Temperature-22 to 185 F (-30 to 85 C)
    Relative Humidity10 to 95%, non-condensing
    EMI/EMC/ESDIEC 801-4, Level 1
    ShockIEC 68-2-27 (MIL STD 810D), 50 g, 11 ms, any axis
    VibrationIEC 68-2-27 (MIL STD 810D), 3 g, any axis, 11-200 Hz
    Downloads