The compact CS 032 high performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 37 CFM
• Screw Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E234324, VDE, EAC

The compact CS 032 high performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 37 CFM
• Screw Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E234324, VDE, EAC

The compact CS 032 high performance fan heater prevents the formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 37 CFM
• Screw Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E234324, VDE, EAC

The compact CR 030 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 94 CFM
• Screw Mounting
• Fixed Hygrostat
• II (double insulated) / IP20
• UL File No. E234324, VDE, EAC

The compact CR 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 94 CFM
• DIN Mounting
• Fixed Hygrostat
• II (double insulated) / IP20
• UL File No. E234324, VDE, EAC

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 50W Heating Capacity
• Screw Mount
• Aluminum Housing

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 50W Heating Capacity
• Screw Mount
• Aluminum Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum Aluminum

Compact convection heater of temperature class T3 (392 F / 200 C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• 2m Cable
• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

The Stego 08400.9-01 is designed to permit a controlled change in pressure which can be easily installed in any enclosure.

• IP55 Protection
• Set of Two Plugs
• Plastic

The Stego 28405.0-00 is designed to provide a protected enclosure environment for valuable and crucial components with a UL 4X rated degree of protection. A waterproof membrane inside the device allows air and humidity to leave the enclosure while not allowing moisture and dust from the outside to enter.

• NEMA 4X/IP66
• Air Permeability 1200 liters/hr
• Waterproof Membrane
• Set of Two Plugs
• Plastic