Enclosure Hygrostats

The Stego EFL 012 series hygrostat is used for controlling heating and cooling equipment, filter fans or signal devices through the Relay SM 010 or a similar device. The hygrostat registers the surrounding relative humidity and can switch a signal current via an internal relay with a potential free change-over contact.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 12-48 VDC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 120 VAC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 �F (+5 �C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 �F (+5 �C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 �F (+5 �C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 230 VAC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Fixed Hygrostat
• Humidity Setting: 65% RH
• Operating Voltage: 120 VAC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Fixed Hygrostat
• Humidity Setting: 65% RH
• Operating Voltage: 230 VAC
• Mounting: DIN Rail

The Stego MFR 012 series hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

• Mechanical Adjustable Hygrostat
• Humidity Setting: 35-95% RH
• Mounting: DIN Rail