Enclosure Thermostats

Stego's KTS 111 series 11101.0-02 is a normally open (NO) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been reached. The contact closes when temperature is rising. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.

• Temperature Range: +20 to +80 �C
• Safe wiring with push-in connection terminal
• Faster and tool-free wiring
• Easy adjustability of switch temperature setting

The ST 011 thermostat is an SPST regulator with small hysteresis. The housing design ensures optimized air circulation around the sensor element.

• Adjustable Thermostat
• Setting Range (NO) : 32-140 F

• Adjustable Thermostat
• Setting Range (NO) : 32-140 F

• Adjustable Thermostat
• Setting Range (NO) : 32-140 F

The FLZ series are available with N.C. / N.O. and changeover contacts. In combination with control cabinet heaters, they serve for temperature control inside the control cabinet.

• Adjustable Thermostat
• Setting Range (NO) : 32-140 F

• Fixed Thermostat
• Switch On: 122 F / 50 C | Switch Off: 104 F / 40 C

• Fixed Thermostat
• Switch On: 140 F / 60 C | Switch Off: 122 F / 50 C

• Fixed Thermostat
• Switch On: 95 F / 35 C | Switch Off: 77 F / 25 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 40-140 F
  Setting Range (NO): 40-140 F

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The SKT series thermostats are available with N.C. / N.O. and changeover contacts. In combination with control cabinet heaters, they serve for temperature control inside an enclosure.

• Adjustable thermostat
• Setting range (NC): 30 - 140°F