The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Thread: M16

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Lock-Out
• Steel Lock Nut
• Thread: M16

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M16

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN607.1 are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Lock-Out
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Thread: M16