The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.1 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out