The products below are available right now, we just don't have a page created for them yet. Please contact us for inquiries in the meantime.
List View
The FLZ series are available with N.C. / N.O. and changeover contacts. In combination with control cabinet heaters, they serve for temperature control inside the control cabinet.
The Altech APT Mechanical Panel Thermostats are designed to control the air temperature inside of enclosures and control panels. They can be used for enclosure heaters, cooling equipment, or signal devices.
Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30� to 140� F and is easily installed on 35mm mounting rail.
The Bud Industries TS-15-A is designed to prevent shut-downs caused by overheating of electronic or electrical equipment in enclosures.
Stego's KTS 111 series 11101.0-01 is a normally open (NO) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been reached. The contact closes when temperature is rising. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.
The ST 011 thermostat is an SPST regulator with small hysteresis. The housing design ensures optimized air circulation around the sensor element.
Stego's KTS 111 series 11101.0-00 is a normally open (NO) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been reached. The contact closes when temperature is rising. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.