Thermal Regulating & Monitoring

The Stego MFR 012 series hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

• Mechanical Adjustable Hygrostat
• Humidity Setting: 35-95% RH
• Mounting: DIN Rail

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 40-140 F
  Setting Range (NO): 40-140 F

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The SKT series thermostats are available with N.C. / N.O. and changeover contacts. In combination with control cabinet heaters, they serve for temperature control inside an enclosure.

• Adjustable thermostat
• Setting range (NC): 30 - 140°F

The SKT series thermostats are available with N.C. / N.O. and changeover contacts. In combination with control cabinet heaters, they serve for temperature control inside an enclosure.

• Adjustable thermostat
• Setting range (NC): 0-60°C

The SKT series thermostats are available with N.C. / N.O. and changeover contacts. In combination with enclosure filter fans, they provide additional savings on energy, materials and time and, hence, provide a better environmental balance.

• Adjustable thermostat
• Setting range (NO): 30 - 140°F

The SKT series thermostats are available with N.C. / N.O. and changeover contacts. In combination with enclosure filter fans, they provide additional savings on energy, materials and time and, hence, provide a better environmental balance.

• Adjustable thermostat
• Setting range (NO): 0-60°C

The SKTD series of twin thermostats integrates two independently switchable thermostats.

• Dual adjustable thermostat
• Setting range (NO): 32-140°F
  Setting range (NO): 32-140°F